KLIPSCH RF-7-III-WALNUT
Klipsch RF-7 III Walnut Wood Furniture Made Floorstanding Speaker (Ea.)
In Stock
$2199.00 *
* Online prices honored in-store.
Payments Available Through
Klipsch RF-7 III Floorstanding Speaker - 1.75" Titanium Driver - 10" Cerametallic Woofers - Dual Chamber Enclosed - Sensitivity 100dB - Tractrix Horn - Great Sound - Frequency Response 32Hz-25kHz - Bass Reflex - 250W/1000W Power Handling - 8 Ohms Impedance - Crossover Range 1300Hz - (13.88"W x 17.88"D x 49.00"H) - (Walnut)
90° x 90° TRACTRIX® HORN
The redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible.
ALL-NEW DRIVING FORCE
1 3/4" TITANIUM DIAPHRAGM COMPRESSION DRIVER The compression driver features a new phase plug design to improve phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
SPUN COPPER CERAMETALLIC WOOFERS™
Cerametallic woofers represent the pinnacle of Klipsch driver design, maintaining exceptional rigidity, and lightweight construction, for minimal cone breakup and distortion. When paired with the Tractrix horn-loaded compression driver, it provides speaker efficiency highest in its class.
NEW DUAL CHAMBER + TRACTRIX® PORT
The RF-7 III new bifurcated enclosure allows each 10” driver and port to work independently from the other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet that can cause frequency anomalies in the sensitive midrange frequencies. Utilizing Tractrix geometry, the new RF-7 III ports allow for the most efficient air transfer from the cabinet — for the cleanest, most powerful low frequency response on the market.
CAST FRAME WOOFER DESIGN
Each 10” woofer feature a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure design to eliminate modulation of the magnetic flux resulting in improved linearity of cone movement.
FURNITURE GRADE WOOD VENEERS
The RF-7 III floorstanding speaker enclosures all utilize furniture grade wood veneers, and are available in Black Ash, Cherry & Walnut.
DESIGNED & ASSEMBLED IN AMERICA
These speakers are built to rigid Klipsch standards — the toughest in the industry. Remember great sound? We do, too. These speakers are Designed & Assembled in the USA, by proud craftsmen in Hope, Arkansas. Just like Paul W. Klipsch (PWK) intended.
RF-7 III Walnut
Featuring an all-new titanium compression driver, 90x90 compressed molded-rubber Tractrix horn, redesigned bifurcated cabinet, cast basket Cerametallic woofers and finished in a premium, furniture-grade wood veneer - the RF-7 III floorstanding speaker champions our legendary, high-performance Klipsch sound.
Key Features
- All-New 1 3/4" Titanium Compression Driver
- 90x90 Compressed Molded-Rubber Tractrix Horn
- Redesigned Bifurcated Cabinet
- Dual Tractrix Ports
- Dual 10" Cast Basket Cerametallic Woofers
- Premium Furniture-Grade Wood Veneers
- Assembled in Hope, AR
90° x 90° TRACTRIX® HORN
The redesigned Tractrix Horn utilizes a circular horn throat paired to a square horn mouth to further improve high-frequency response and extension while enhancing imaging and dynamics. The compressed molded rubber construction adds high-frequency damping to reduce harshness and improve detail. This creates the cleanest, most natural sound possible.
ALL-NEW DRIVING FORCE
1 3/4" TITANIUM DIAPHRAGM COMPRESSION DRIVER The compression driver features a new phase plug design to improve phase coherency at the throat of the horn, resulting in improved sound pressure linearity at high frequencies.
SPUN COPPER CERAMETALLIC WOOFERS™
Cerametallic woofers represent the pinnacle of Klipsch driver design, maintaining exceptional rigidity, and lightweight construction, for minimal cone breakup and distortion. When paired with the Tractrix horn-loaded compression driver, it provides speaker efficiency highest in its class.
NEW DUAL CHAMBER + TRACTRIX® PORT
The RF-7 III new bifurcated enclosure allows each 10” driver and port to work independently from the other. This improves the linearity of both drive systems, and minimizes standing wave problems inside the cabinet that can cause frequency anomalies in the sensitive midrange frequencies. Utilizing Tractrix geometry, the new RF-7 III ports allow for the most efficient air transfer from the cabinet — for the cleanest, most powerful low frequency response on the market.
CAST FRAME WOOFER DESIGN
Each 10” woofer feature a heavy-duty cast aluminum frame for resonant-free operation. In addition, each woofer incorporates a dual shorting-ring magnet structure design to eliminate modulation of the magnetic flux resulting in improved linearity of cone movement.
FURNITURE GRADE WOOD VENEERS
The RF-7 III floorstanding speaker enclosures all utilize furniture grade wood veneers, and are available in Black Ash, Cherry & Walnut.
DESIGNED & ASSEMBLED IN AMERICA
These speakers are built to rigid Klipsch standards — the toughest in the industry. Remember great sound? We do, too. These speakers are Designed & Assembled in the USA, by proud craftsmen in Hope, Arkansas. Just like Paul W. Klipsch (PWK) intended.
-
SUMMARY
Brand: klipsch Summary: Klipsch RF-7 III Floorstanding Speaker - 1.75" Titanium Driver - 10" Cerametallic Woofers - Dual Chamber Enclosed - Sensitivity 100dB - Tractrix Horn - Great Sound - Frequency Response 32Hz-25kHz - Bass Reflex - 250W/1000W Power Handling - 8 Ohms Impedance - Crossover Range 1300Hz - (13.88"W x 17.88"D x 49.00"H) - (Walnut) Category: FLOOR-STANDING-SPEAKERS Model: RF-7-III-WALNUT MPN: 1065048 UPC: 743878034851 Description: Klipsch RF-7 III Walnut Wood Furniture Made Floorstanding Speaker (Ea.) Series: Reference III Color: Walnut Retail: $2,199.00 Warning: 
Energy Guide: 
The Different Dolby Sound Systems
Posted on 12:00am on Thursday 2nd February 2017 by Walts
There are 4 Dolby Sound Systems currently in use.
Dolby 5.1, Dolby Atmos 5.1, Dolby 7.1 & Dolby Atmos 7.1
Dolby 5.1
Dolby 5.1 utilizes 5 Speakers & a Subwoofer. The Speakers are placed as follows: Front, Left, Right & Center. Rear, Left & Right. The Subwoofer is usually placed Front Center.
Dolby 7.1
Dolby [..]
Klipsch Music City Series!
Posted on 12:00am on Friday 10th May 2024 by Walts
Take your entertainment with you ALL SUMMER LONG!
Take your entertainment with you ALL SUMMER LONG!
Who’s ready for Summer Break and all the adventures that come along with it? I know I am. But what does every adventure need? A soundtrack! Now you can take your entertainment with you [..]
What is DTS:X? Why is it important?
Posted on 12:00am on Tuesday 7th March 2017 by Walts
DTS:X is a 3 dimensional sound format very similar to Dolby Atmos. Sound is sent from Above, as well as from the Left & Right and Front & Rear. A feature of DTS:X is the ability to place the Speakers in the Room, the way [..]