Audio-Technica AT-LP120XUSB-BK Direct-Drive 3-Speed Manual USB Turntable - High-Fidelity Audio - Direct-Drive - DC Servo Motor - Manual Operation - Adjustable Anti-Skate Control - Three Speeds 33-45-78 RPM - Anti-Resonance - Switchable Phono Pre-Amplifier - Two Output Levels - Pitch Control - Die-Cast Aluminum Platter - Signal-To-Noise Ratio >50 dB - USB Function - Electronic Brake - 2.75W Power Consumption - (17.80"W x 13.86"D x 5.57"H) - (Black)

Audio Technica AT-LP140XP-BK DJ Professional Black Turntable - Experience High Fidelity - Direct Drive - High Torque - Fully Manual Operation - Adjustable Dynamic Anti Skate Control - Selectable 3/45/78 RPM Speeds - AT-HS6 Universal 1/2" Mount Headshell - Balanced S shaped Tonearm - Dedicated Phono Level Output - Stroboscopic - Forward Reverse Operation - Popup Stylus Target - Damped Base Construction for Lower Frequency Feedback - Includes: Detachable RCA Output Cable to RCA Male, Power Cable, 45 RPM Adapter, Counterweight, Removable Hinged Dust Cover - (Black)

Audio Technica VM740ML Stylus Cartridge - Dual Moving Magnet - 700 Series - MicroLine Stylus - Multilevel Shape - Reduces Wear on Records - Aluminum Tapered Cantilever - Paratoroidal Coils - Center Shield Plate - Die-Cast Aluminum Alloy Housing - 20Hz-27kHz Frequency Response - 28dB Channel Separation - 23 Degree Vertical Tracking Angle - 1.8-2.2g Vertical Tracking Force - Nude Square Shank Stylus - 47kOhms Recommended Load Impedance - 2.7kOhms Coil Impedance - 800Ohms DC Resistance - 460mH Coil Inductance - 4.0mV Output Voltage - 1dB Output Channel Balance - 2.2 x 0.12 mil MicroLine Stylus - 40 x 10-6 cm/dyne Static Compliance - 10 x 10-6 cm/dyne Dynamic Compliance - Half Inch Mounting - 100-200pF Recommended Load Capacitance - Hardware Included - (0.70"W x 1.10"D x 0.70"H) - (Red/Gold)

Audio Technica VMN20EB Replacement Stylus - Elliptical - For VM520EB Cartridge - 0.3 x 0.7 - (Purple)

Audio Technica AT-VM95ML-H Dual Moving Magnet Cartridge on Headshell - AT-VM95ML Cartridge - AT-HS6BK Headshell - 2.2 x 0.12 mil Microlinear Stylus - Aluminum Cantilever - Specially Wound Coils - Durable Low-Resonance Polymer Housing - Threaded Inserts - 2 Screw Mounting - Compatible with Any AT-VMN95 Replacement Stylus - Universal 1/2" Mount Headshell for 4-Pin Cartridges - 20Hz-25kHz Frequency Response - 23dB Channel Separation - 23 Degrees Vertical Tracking Angle - 1.8-2.2g Vertical Tracking Force - Nude Square Shank Stylus - 47kOhms Recommended Load Impedance - 3.3kOhms Coil Impedance - 485Ohms DC Resistance - 550mH Coil Inductance - 3.5mV Output Voltage - 1.5dB Output Channel Balance - 20 x 10 - 6 cm/dyne Static Compliance - 10 x 10 - 6 cm/dyne Dynamic Compliance - Hardware Included - 100-200pF Recommended Load Capacitance - T.P. Copper - (0.84"W x 2.46"D x 0.83"H) - (Black/Red)

Audio Technica VM520EB-H Headshell and Cartridge Combo - AT-VM520EB Dual Moving Magnet Cartridge - AT-HS10BK Headshell - 0.3 x 0.7 mil Elliptical Stylus - Aluminum Cantilever - Paratoroidal Coils - Center Shield Plate - Durable Low Resonance Polymer Housing - Universal Half Inch Mount Headshell - For 4 Pin Turntable Cartridges - 20Hz-23kHz Frequency Response - 27dB Channel Separation - 23 Degree Vertical Tracking Angle - 1.8-2.2g Vertical Tracking Force - Bonded Round Shank Stylus - 47kOhms Recommended Load Impedance - 2.7kOhms Coil Impedance - 800Ohms DC Resistance - 460mH Coil Inductance - 4.5mV Output Voltage - 1.5dB Output Channel Balance - 35 x 10-6 cm/dyne Static Compliance - 8 x 10-6 cm/dyne Dynamic Compliance - 100-200pF Recommended Load Capacitance - Hardware Included - (0.80"W x 2.40"D x 0.80"H) - (Black/Blue)

Audio Technica AT-VM95EN Cartridge - Dual Moving Magnet Cartridge - Compatible with AT-VMN95 Replacement Styli - 0.3 x 0.7 mil Elliptical Nude Stylus - Aluminum Cantilever - Durable Low Resonance Polymer Housing - Threaded Inserts - Half Inch Mounting - 20Hz-23kHz Frequency Response - 22dB Channel Separation - 23 Degree Vertical Tracking Angle - 1.8-2.2g Vertical Tracking Force - Nude Round Shank Stylus - 47kOhms Recommended Load Impedance - 3.3kOhms Coil Impedance - 485Ohms DC Resistance - 550mH Coil Inductance - 3.5mV Output Voltage - 2dB Output Channel Balance - 20 x 10-6 cm/dyne Static Compliance - 7 x 10-6 cm/dyne Dynamic Compliance - 100-200pF Recommended Load Capacitance - Hardware Included - T.P. Copper Coil - (0.74"W x 1.20"D x 0.68"H) - (Black/Orange)

Audio Technica AT-LP5X Turntable (2020) - Fully Manual Operation - Low Noise Motor - Direct Drive - Speeds: 33-1/3 RPM, 45 RPM, 78 RPM - AT-VM95E Dual Moving Magnet Stereo Cartridge - Replaceable Stylus - Lightweight AT-HS6 Headshell - J-shaped tonearm - Switchable MM/MC Built-In Pre-Amplifier and Line - Anti-Resonance, Die-cast Aluminum Platter - Heavy Rubber Damping Mat - Accessories Included: Dual RCA (male) to Dual RCA (male) Stereo Cable, 45 RPM Adapter, USB Cable, Dust Cover, Mounting Hardware - (17.72"W x 13.86"D x 6.18"H) - (Matte Black)

Audio Technica AT-LP7 Turntable (2018) - Fully Manual Operation - Belt Drive - Speeds: 33-1/3 RPM, 45 RPM - VM520EB Dual Moving Magnet Cartridge -J-shaped tonearm - Switchable Phono Built-In Pre-Amplifier - Anti-Resonance, Polyoxymethylene Platter - MDF Chassis - Lightweight AT-HS10 Headshell - Accessories Included: Dual RCA (male) to Dual RCA (male) Stereo Cable, 45 RPM Adapter, Dust Cover - (17.72"W x 13.86"D x 6.18"H) - (Black)

Audio Technica AT-LP70X-BG Turntable - Fully Automatic Belt Drive - Integrated AT-VM95C Phono Cartridge - DC Motor - Plays 33-1/3 and 45 RPM Records - Built-in Switchable Phono Pre-Amplifier - J-Shaped Tonearm - Accessories: Dust Cover, Felt Mat, Platter, Dust Cover Hinges, 45 RPM Adapter, RCA Audio Cable, AC Adapter - (16"W x 13"D x 4.3"H) - (Black/Gray)